CNC Turning Services
CNC Turning
Precision CNC turning for aerospace shafts, bushings, and housings. AS9100 and ITAR-registered — tight concentricity, clean finish, multi-axis capability.
Overview
What Is CNC Turning?
CNC Turning is the process of shaping a rotating part with computer-run cutting tools on a lathe. As a result, EGM Manufacturing makes shafts, bushings, housings, and connectors with tight concentricity and clean surface finish. Therefore, every part meets the tough needs of aerospace and defense assemblies.
CNC Turning from EGM Manufacturing delivers precision rotating parts built for aerospace and defense programs. First, our team reviews every CAD file to confirm the part can be made. Next, we run the job on multi-axis lathes staffed by seasoned machinists. Additionally, our AS9100 and ITAR-registered shop in Sunrise, Florida supports buyers who cannot accept runout drift or late delivery. Our turning cell handles threading, grooving, and tight-tolerance features in one setup. With no volume minimums and fair pricing, EGM scales from one prototype to 1,000+ units.
Shop Floor Quality
Turned Parts Built to Aerospace Standards
From shafts and bushings to complex housings — our turning centers hold tolerances down to ±.0005″ on every run, backed by CMM inspection and full traceability documentation.
Why Choose EGM
Why Choose EGM for CNC Turning
- AS9100 and ISO 9001:2015 certified for a full aerospace paper trail and logged quality on every turned part
- Multi-axis turning centers with threading, grooving, and complex feature work in one setup
- Max turned part size of Ø 350 x 600 mm so shafts, housings, and pressure bodies fit our envelope
- Fine tolerance down to ±.0005″ on metals, backed by CMM checks on every batch shipped
- Aerospace-grade stock on hand — 6061, 7075, 17-4, 316, titanium, brass, copper, PEEK, and Delrin
- Fast lead times as short as 8 days on turned parts under 50 units, including full paperwork
Aerospace & Defense
Why CNC Turning Matters for Aerospace and Defense
When a rotating part fails in a flight or defense system, the result is total loss of function. Therefore, aerospace and defense buyers demand CNC Turning done inside a certified quality system. Moreover, tight runout, strength, and repeat accuracy are not optional on shafts, bushings, or pressure housings. A turned part that holds clean threads and true runout makes sure the assembly is safe and steady under load. Plus, EGM runs every turning job inside the same quality system used for milled work — so paperwork stays in one place.
Multi-Axis Value
Is Multi-Axis Turning Worth the Cost Over Standard Lathe Work?
Often, yes. Multi-axis turning mixes threading, grooving, milled flats, cross-holes, and turned features in one setup. As a result, buyers save on fixture cost, setup time, and handling error. Plus, runout stays tight because the part never leaves the chuck. Therefore, total part cost usually drops despite higher hourly rates.
Our Process
How Our CNC Turning Process Works
Every CNC Turning job at EGM follows a clear workflow. First, your team submits CAD files, 2D drawings, and material specs. Next, our engineers review the package, confirm the part can be made, and plan tooling. Then, the job goes to the right lathe based on size, length, and how complex the features are. After that, our CMM checks key dimensions against print — including runout, diameter, and threaded features. Finally, we ship with full paperwork.
Materials
What Materials Does EGM Turn for Aerospace Parts?
EGM routinely turns aerospace-grade aluminum alloys like 6061, 6061-T6, 6082, and 7075. Plus, we cut stainless steels like 303, 304, 316, 17-4, 420, and 2205 duplex. Moreover, we work titanium, brass, copper, alloy and tool steels, plus plastics like PEEK, PTFE, Delrin, UHMW, and G-10. Custom materials get case-by-case review.
- 6061
- 6061-T6
- 6082
- 7075
- 303
- 304
- 316
- 17-4
- 420
- 2205 Duplex
- Titanium
- Brass
- Copper
- Alloy steel
- Tool steel
- PEEK
- PTFE (Teflon)
- Acetal (Delrin)
- UHMW
- G-10
- Reviewed case by case
Tolerances
What Tolerances Can EGM Hold on Turned Parts?
| Type | Metals | Plastics |
|---|---|---|
| Standard Tolerance | ±0.005″ | ±0.010″ |
| Fine Tolerance | ±0.0005″ | ±0.005″ |
| Runout (typical) | ±0.001″ on standard aerospace shafts | |
| Max Part Size | Ø 350 x 600 mm (Ø 13.8 x 23.6 in) | |
| Lead Time (<50 parts) | As low as 8 days | |
FAQ
Frequently Asked Questions About CNC Turning
EGM can turn parts up to Ø 350 x 600 mm, or roughly Ø 13.8 x 23.6 inches. Plus, we hold minimum feature sizes down to 0.50 mm in diameter. Therefore, large shafts, housings, and small precision bushings all fit within our shop envelope.
Standard turned batches under 50 parts can ship as quickly as 8 days. However, complex multi-axis work, exotic alloys, or special finishes push out the timeline. Therefore, our team gives an exact delivery date at quote — not after the job starts — so aerospace and defense program schedules stay on track.
Yes. Our multi-axis lathes handle single-point threading, tapped holes, outer and inner grooves, live-tool milled features, cross-holes, and face slots. Plus, all of these steps can run in one setup. Therefore, buyers get complete rotating parts without routing the job to a second milling step.
Yes. EGM Manufacturing is ITAR registered and holds a JCP Certification (DD2345). As a result, we can receive and handle controlled unclassified information and defense-related technical data. Plus, all ITAR drawings run through secure systems with access limited to cleared staff. Please contact our team before sending any controlled package.
Runout depends on material, length-to-diameter ratio, and how complex the feature is. However, EGM routinely holds runout within ±0.001″ on standard aerospace shafts. Plus, tighter specs are possible on short parts with proper fixturing. Therefore, please send your drawing with concentricity callouts and our team will confirm what we can hold at quote.
Related Services
Explore Our Other CNC Capabilities
Launch Your Program
Launch Your Next Program With EGM's CNC Turning Team
AS9100, ITAR, and JCP credentials plus fifty-plus years of combined machining know-how. Scale from one prototype to full production without switching suppliers.
Contact Us Today to Get Started